The FRT-15 trigger is a game-changing device for firearm enthusiasts seeking to achieve speed, precision, and superior control. Its advanced engineering allows for a seamless forced reset mechanism, making it a popular choice among competitive shooters and tactical professionals. However, like any high-performance firearm accessory, the FRT-15 requires regular maintenance to ensure it operates effectively and safely over the long term. Neglecting your trigger's upkeep can lead to performance issues or even damage. This guide walks you through essential maintenance tips to keep your FRT-15 trigger in peak condition, whether you're on the range or storing it away. Rare breed trigger.

Why Maintenance Is Crucial for the FRT-15

The FRT-15 trigger is precision-engineered, meaning every component plays a vital role in its functionality. Regular use exposes the trigger to carbon buildup, friction, and wear, all of which can affect its performance. Proper maintenance enhances the longevity of your trigger, ensures its reliability, and promotes safety by minimizing the risk of mechanical failure. Think of trigger maintenance as investing in the durability and consistent performance of your firearm.

Now, let's explore the specific steps to maintain your FRT-15 trigger.

1. Cleaning the FRT-15 Trigger

Regular cleaning is essential to remove debris, carbon buildup, and other particulates that accumulate during firing. To clean your FRT-15:

• Step 1: Disassemble the Trigger (If Applicable)
  Safely unload your firearm before starting any maintenance. Remove the trigger group from the lower receiver of your AR-15, following the manufacturer's disassembly guide. Avoid full disassembly of the trigger mechanism unless you're experienced and have the necessary tools.

• Step 2: Use a Cleaning Solvent
  Apply a high-quality cleaning solvent designed for firearms to break down residues. A small brush or a toothbrush can help scrub carbon deposits off the surface of the trigger mechanism without damaging the delicate parts.

• Step 3: Wipe Clean
  Use clean, lint-free cloths to wipe the solvent and loosened debris from the trigger group. Ensure all visible carbon and fouling are removed. Cotton swabs can help access tight spaces within the trigger assembly.

• Step 4: Compressed Air (Optional)
  For precision cleaning, use a can of compressed air to clear out particles from hard-to-reach areas.

Make cleaning part of your routine, especially after every range session or once significant dirt buildup is noticeable.

2. Proper Lubrication

Lubrication is critical for reducing friction and wear between moving parts of the FRT-15 trigger. To lubricate effectively:

• Choose the Right Lubricant: Opt for a high-grade firearm lubricant designed to withstand high-pressure environments. Avoid over-application, as excess lubricant can attract dirt and debris.

• Where to Apply:
  Focus on key friction points, such as the sear, hammer, and reset mechanism. A few drops are typically sufficient for these areas.

• Spread Evenly:
  Use a small brush or your finger (with gloves) to evenly spread the lubricant, ensuring each component is adequately coated without oversaturation.

• Dry Lubricants for Dusty Environments:
  If you're shooting in dry, dusty conditions, consider using a dry-film lubricant to prevent dirt from sticking to wet oil.

Regular lubrication keeps your trigger running smoothly and prevents excessive friction that can damage components over time.

3. Inspect for Wear or Damage

Frequent inspection helps identify potential issues before they become serious problems. When examining your FRT-15 trigger:

• Check the Trigger Mechanism: Inspect the trigger assembly for signs of wear, cracks, or deformation. Pay particular attention to the sear and reset components that endure the most stress.

• Inspect the Springs: Verify that the springs remain intact and properly tensioned. A weak or broken spring can lead to inconsistent trigger performance.

• Examine Pins and Housing: Ensure the trigger pins are seated correctly and the housing shows no signs of bending or damage caused by excessive stress. Misaligned pins or warping can affect performance.

• Look for Rust or Corrosion: Moisture can lead to corrosion, especially in high-humidity environments. If you detect rust, clean the affected area and apply a protective oil or rust inhibitor.

Conduct a visual inspection each time you clean your firearm.

4. Troubleshooting Common Issues

Even with proper maintenance, occasional issues may arise. Here’s how to address some common problems you might encounter with the FRT-15:

• Trigger Fails to Reset:

  • Cause: This issue is often due to insufficient lubrication, buildup of debris, or a worn-out spring.
  • Solution: Clean the trigger thoroughly, ensure proper lubrication, and replace the reset spring if necessary.

• Sticky or Rough Pull:

  • Cause: Dirt or grit could be obstructing the trigger's mechanism, or there may be damage to the internal components.
  • Solution: Perform a deep clean and inspect for wear. If the issue persists, consider seeking professional assistance from a gunsmith.

• Loose or Wobbling Pins:

  • Cause: Excessive use can loosen the trigger pins or compromise the pin holes in the housing.
  • Solution: Tighten or replace the trigger pins and consult the manufacturer if the housing is excessively worn.

• Trigger Assembly Feels Loose in the Receiver:

  • Cause: This may be due to improper installation or wear to the receiver itself.
  • Solution: Reinstall the trigger group, ensuring pins and housing are secure. If the problem persists, investigate potential issues with the firearm's receiver.

5. Storing the FRT-15 Trigger Safely

When storing your firearm, take steps to protect the FRT-15 trigger from damage and moisture:

• Apply a thin coat of protective oil to the trigger assembly before storage to prevent rust.
• Store in a cool, dry place with a dehumidifier if possible, especially in humid climates.
• Avoid long-term storage in cases with foam liners, as these can trap moisture.

Proper storage extends the life of your trigger and minimizes the need for in-depth repairs.

Final Thoughts

The FRT-15 trigger is a high-performance component that, when maintained correctly, delivers consistent results over the long haul. With regular cleaning, proper lubrication, thorough inspections, and proactive troubleshooting, you can ensure your trigger performs flawlessly during every range session.

By incorporating these maintenance practices into your firearm care routine, you’ll not only extend the life of your FRT-15 but also gain confidence in its reliability and safety. Remember, a well-maintained firearm is a safer and more enjoyable one.